SOL8SDR Hardware Guide
Commercial in Confidence
Revision 8.0
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2016 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 1-4
Growing USB support for peripherals such as 3G/4G/Wi-Fi dongles
Ethernet, RS232 and RS485 connectivity and 128GB built in storage
Higher power packaging without the need for breakout cables
Very low power consumption: typically 12.5W
Exceptionally small size: 200mm x 100mm x 27mm
Weighs only 950g
1.4.3
Basic Specifications
Dimensions (mm)
235mm (L) x 100mm (W) x 26mm (H).
Weight
950g
Operating
Temperature
-10°C to +50°C.
Power Consumption
Typically 12.5W (SD), 13.5W (HD), 14.5W (Dual).
DC
Input
8 to 18VDC reverse polarity protected.
DC
Output
1A pass through switchable. 5V regulated output limited to 1A (switchable)
1.5
Approval Notices
1.5.1
EMC/Safety and Radio Approvals
The equipment has been designed to meet and has been tested against harmonized EMC and safety
standards.
1.5.2
CE Marking
The CE mark is affixed to all DTC products, the CE Declaration of Conformity as well as the technical file is
available on request.
1.6
FCC EMC Compliance
Where SOL8SDR-C and SOL8SDR-P devices carry an FCC compliance identifier on the label (see
section
), the following statement applies:
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this
device does not cause harmful interference.
The use of frequencies not listed in the grant filing are prohibited.
Changes or modifications not expressly approved by Domo Tactical Communications (DTC) could void
the user’s authority to operate the equipment.
