Revision 19.0
SOLO7 Transmitter Family User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-56
5.7.2
Video Settings
Note
: The video encoder settings can be configured for optimum performance using the sliders on the
Control Application primary window, see
Section 4.3 or refer to Section 7.5 for guideline settings.
Name
Options
Notes
Video Source
Off
Composite 1
Composite 2
S-Video
HD Nano TX and OBTX:
SDI
HDMI
Select the video source input.
With the supplied CA2254 breakout cable,
there is one yellow RCA Phono plug for
Composite 1 video.
With the optional CA2298 breakout cable
you can connect two video inputs or S-
Video.
Video Source Format
Automatic
PAL
NTSC
NTSC NP
HD Nano TX and OBTX:
720p50, 720p59, 720p60
1080i50, 1080i59, 1080i60
1080p23, 1080p24, 1080p25,
1080p29, 1080p30, 1080p50,
1080p59, 1080p60
1080psf23, 1080psf24,
1080psf25, 1080psf29,
1080psf30
1080dl50, 1080dl59, 1080dl60
Select the video format that matches the
camera you are using.
Alternatively, the
Automatic
setting will
determine the video source.
Power up standard in Automatic mode
defaults to PAL. This can be changed by
setting the input to NTSC NP for example
and then back to Automatic.
Note
: 1080p50/59/60 equates to 3G-SDI
Level A, and 1080dl50/59/60 is 3G-SDI
Level B-DL.
