Revision 19.0
SOLO7 Transmitter Family User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 5-40
5.
Domo Device Controller Operation
5.1
Introduction
Note
: The HD transmitters will have some different options to the SD transmitters. Where this is the case,
they will be explained.
To get the most from your radio system you must customise the programming for your operations and area.
The SOLO7 Transmitter uses the
Domo Device Controller
software running on your PC which enables you to
perform many configuration tasks quickly and easily. These next topics tell you how to connect your PC to
the Nano Transmitter and then use your Domo Device Controller to configure the unit.
If the
Device
Controller
menu shows a ‘lock’ symbol
next to a feature, this means that it is not
available for your device variant or that it is missing a license.
Note
: SOL7OBTX can also be controlled from the front panel control interface. This is explained in detail in
Section 5.13.
5.2
Unit Status Panel
No
Name
Options
Description
1
RF Button
Red=RF off
Green=RF on
Click to toggle RF on or off.
2
Video Lock
Red=unlocked
Green=locked
Tells you if the unit has successfully locked to the
video source.
Unlocked will also be shown if video is disabled.
3
Audio Lock
Red=unlocked
Green=locked
Tells you if the unit has successfully locked to the
audio source.
Unlocked will also be shown if audio is disabled.
