Revision 19.0
SOLO7 Transmitter Family User Guide
Copyright © 2013 Domo Tactical Communications (DTC) Limited. All rights reserved.
Commercial in Confidence
Page 4-35
4.2
Connecting your PC to the SOLO7 Transmitter
Ensure your transmitter is connected by either USB or serial control and is powered up.
Note
: If using an OBTX for the first time, you may need to install drivers to enable the Com Port. See
Section
7.6. You will need to establish the Com Port that has been created for the OBTX from your PC’s Device
Manager.
Double-click Domo Device Controller icon on the computer desktop to open the Domo Device Controller.
Click the connection button.
Select
USB
or
Serial Port
in the device connection window (dependent on your device connection). You’ll see
the
USB
identification number or serial port
Com Port
of the Transmitter.
