SPLINE
®
Technical Manual
10
Con
ver
ting
t
he
Hub [
Ins
ert
e
d
Ad
ap
te
rs]
V2
01
3.
1
1
_E
N
3.1
Converting the Hub [Inserted Adapters]
Removing the Adapter
Preparatory Steps
Link
Rear wheel: Remove the cassette if necessary.
see instructions of
the manufacturer
Required Material
Specification
Amount
universal grease
as required
NOTE
Risk of damage of the adapters!
To avoid damages, only use grind clamping jaws, aluminium clamping jaws or special tools to clamp the
adapters.
NOTE
Deviation of the figures!
For simplification, the conversion of the hubs is only shown with a rear wheel QR hub. The following ac-
tions are valid for all hubs with inserted adapters.
1.
Clamp the left adapter into a vice using an axle
holder.
2.
Pull the hub or the wheel upwards.
3.
Clamp the right adapter into a vice using a axle
holder.
4.
Pull the hub or the wheel upwards.
