* *
8 Channel Amplifier Matrix Controller
9
Figure 3-4 Saved confirmation on zone settings interface
(3)
Audio output level settings
On the zone settings interface, click the icon
on the right of "sensitivity" as shown in Figure 3-5, and a
drop-down box will appear. Click and select one of them according to requirements.
Figure 3-5 Zone setting interface
(4)
Monitoring ON/OFF and volume settings
Slide the monitoring slide to ON status
(the system default is OFF) when necessary. When
monitoring is ON, click the switch again to monitor the current zone CH1, and slide the volume slider or
click the icon
or
to adjust the current zone’s monitoring volume.
Click
here
to
adjust
the
sensitivity
