* *
8 Channel Amplifier Matrix Controller
7
Figure 2-2 Help interface
4.3 Interface operation instructions
The upper part of each channel bar controls the on and off of the zone, while the lower part controls the zone
setting interface of the channel. When you click the lower part of the channel bar, you can enter the CH1 zone
setting interface as shown in Figure 3-1. For example, click the channel CH1 in the main interface (the lower part
of the CH1 zone status bar):
Figure 3-1 CH1 zone setting interface
The following operations can be conducted in CH1 setting interface:
(1)
System settings
1)
Working mode settings
Click the icon
in the zone setting interface to open the system setting window (as shown in Figure
3-2 system setting interface). In system setting interface, click the icon
or
to switch
equipment working mode. Select the working mode and click the "exit and save" button, the system will
automatically restart, and then enter the corresponding working mode. The working mode includes 8
mains and 1 standby, 4 main and 1 standby, 4 main and 4 standby, and 4 main and multiple standbys.
