background image

 

*

 Fire-fighting/public addressing system 

Series PC10

 

 

10 

D. Packing list   

 

One  PC1011PII  (Preamplifier) equipment, one operation instruction, one warranty card, one certificate, 

one 568A-568A cable, one SY542 audio cable, two (2) audio conversion plugs, one power cable, M5*18 

cup-head stainless steel screws, black gaskets, one 24V strand wire with plugs at both ends.   

 

E. After-sale Services

 

1.

 

We provide the one-year warranty free of charge (including free supply of spare parts) for any quality 

problem of the product from the day of purchase, if product is installed and used according to this 

manual strictly. 

2.

 

The user must provide the warranty card and sales invoice before the warranty is provided. 

3.

 

The following conditions are not covered by free warranty: 

(1) 

Damages caused by improper installation, use or handling; 

(2) 

Failure of product due to abnormal conditions (e.g. excessively high supply voltage or ambient 

humidity, etc); 

(3) 

Damage to product due to natural and man-made disasters and accidents; 

(4) 

The number of product is changed, altered or deleted; 

(5) 

The product has been repaired or refitted by personnel without the authorization of our 

company; 

4.

 

Please keep the manual and warranty card properly. 

5.

 

For questions or matters not mentioned in the manual, please contact the dealer or visit our website 

http://www.dsppa.com for more information. 

6.

 

In case of any failure of the device during the warranty period, please contact our staff (or the dealer). 

We are not responsible for any free maintenance if the product is damaged due to disassemble by the 

users themselves or due to repair by personnel other than our technicians. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for PC1011PII













Reviews: