23 of 3
4.4. PAVA6000 Operation
There are two control ways of the system partitions in PAVA6000:
Way 1:
select the specified groups or all groups —> specify the effective line input of the host, as shown in the
following figure:
Notes:
1. PAVA6000 automatically identify the valid input line currently selected by the user as the ENABLE; Otherwise it is
marked as the DISABLED State;
2. Because Group 2 in the “Group” of “SYSTEM CONFIGURATION” has only configured the Group 2 of the host,
only Partition 2 is displayed in the list box in the right.
Way 2:
Single partition operation (this operation is only to singly open or close the partition and it cannot control the
type of current output audio):
Click the above of corresponding partition name (a button will appear)
—> click this button to control this
partition, as shown in the following figure:
Step01. Move the mouse to “Zone 01”
；
Step02. Click the left mouse button - an anti-color button appears;
Step03. Chick the left mouse button to control the output state of current partition (LED lights
green for output and die out for closing);
