3.Operation Introduction
3.1
Operation introduction of U Disk and SD mode
(1)
When the device is connected to power supply, open the power switch on rear panel. Press MODE to
switch working mode. When U disk is inserted, press MODE to switch to U disk mode. Display screen will
show LOAD (loading, please wait for 1-3 seconds) then it will enter USB play mode. You will see the
following interface:
(2)
Press PAUSE to pause playback.
(3)
When insert SD card, system will switch to SD card play mode.
3.2
Recording instruction
Press REC to start recording. When you need to pause, just press PAUSE on the panel. Press it again to
continue to record.
