background image

*

*

Network PA System

Network PA System

MAG6463

1

I. Product description

1.1 About MAG6463 wall mount IP speaker

MAG6463 wall mount IP speaker networked speaker is a networked all-digital analog-digital conversion

signal processor with high fidelity speaker based on TCP/IP transmission protocol, so as to realize modern
network display terminal with the overall design of the processor and sound box. Dual network redundancy design.
It can be coupled at any place with access to network. The remote audio data stream can output the audio signal
through the machine, and directly send sound from the sound box with intelligent control of the host machine;
a-way auxiliary audio input is used to connect other audio source device (such as DVD), and a way auxiliary
audio output is used to connect other power amplifiers, so as to expand the power; a MIC interface is used to
realize local paging and so on.

1.2 Performance features

The IP speaker with the integrated design of networked terminal processor and high fidelity speaker.

Redundant design of dual network interface, can work across the network segments.

It can be coupled at any place with access to network.

It has MP3 decoding play function.

It supports maximum 48kHz sampling rate 16bit digital audio bit stream decoding.

2×25W or 1×50W high fidelity digital power amplifier is built in with low power consumption
settings.

It can play the background music, emergency paging, and alarm signal and so on from the system host
machine.

It has a way auxiliary audio input port, a way auxiliary audio output port, a way MIC input port, a way
EMC emergency output port and 1-way short circuit output.

The local output volume and local playing state are controllable.

Signal state LED indication, working state and information change digital display.

It can be controlled by the infrared remote controller.

The source priority and priority depth of the network source, local line source, and local MIC source
can be set freely through the network.

II. Introduction of functions

2.1 Rear panel

6

Summary of Contents for MAG6463
















Reviews: