*
Public Address System
Operating Instructions
3
4. Installation Diagram:
1. Select a proper position on the surface
where the column speaker is to be
installed, and fix two screws
ø
8mm. As
shown on right, mount the bracket and fix
the column speaker.
2. Connect the wire correctly as described in
Section 5. Check if the column speaker is
secure and confirm that the connection is
correct. Then, plug the power cable of
column speaker into AC socket.
5. Description of Back Ports
70-100V constant-voltage
audio input port
300mV AUX audio input
port
From
PA
amplifier
From audio source
equipment
300mV AUX audio output
port
Output to other PA
device
Test port
Test port
Power fuse holder
AC Power inlet