DSPPA D6201, User Manual

Page: 19 / 28

* *
Conference Host
14
maximum number of 30 VIP units. Touch the
"ADD" button to enter the VIP unit operation
interface:
On the interface as shown above, they user may
enter the ID of conference unit to be set as a VIP
unit, and then touch the "OK" button to confirm and
exit the interface.

The user can touch the "DEL" button to delete
the VIP unit selected.

They user may touch the "DELETE ALL"
button to delete all existing VIP units.

With the "Return" button or by touching the
icon, the user can exit VIP setup interface and
return to the unit setup interface.
After the unit setup is completed, the user may
touch the icon on the upper right corner to exit
the unit setup interface and return to the main
interface of the system.
4.2.6 Set speak time
The user may touch the "Timing of Speeches"
button on the "System Setup" interface to enter the
timing setup interface which is as shown below:
On this interface, the user can set up the time limit
for speeches of conventioners and the speech unit
will be automatically shut off when the time is over.
The time limit can be any value between 1 and 300
minutes. D62 series digital conference system
provides a countdown warning function, and the
user can set up the countdown time in this interface,
which should be with the range between 1 and 60
seconds. The countdown will also be displayed on
the speech unit. If the speech timing function is not
needed in the conference, then it can be set as
"OFF".
The user can adjust the values of time limit and
countdown function to the desired value by
touching the small gray arrows after the time
indication .
After the time value setup is completed, the user
may touch the
icon on the upper right corner
to exit the setup interface and return to the main
interface of the system.
4.2.7 Chime set
The user may touch the "Ring tone" icon on the
"System Setup" interface to enter the ring tone
setup interface which is as shown below:
Select the prompt tone when the microphone is
turned on or off. The options available for setup
includes:
"No ring tone"
"Ring tone 1"
"Ring tone 2"
"Ring tone 3"
1) "No ring tone" means that there is no indicating
sound when the microphone of conference unit is
powered on or off.
2) "Ring tone 1- Ring tone 3" indicates that one of
the ring tones will be played when the microphone
on the conference unit is turned on/off.
4.2.8 Set system time
The user may touch the "Time" icon on the "System
Setup" interface to enter the system time setup
interface which is as shown below:
Enter the ID of unit to
be set as a VIP unit.