Documentation Overview
▲
■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■■
DS1104 Hardware Installation and Configuration March 2004
I
■■■■■■■■■■■■■
▼
10
■■■■■■■■■■■■■■■
▼
About This Document
This document will show you the installation of the DS1104 R&D
Controller Board and CP1104/CLP1104 Connector Panels.
It describes the hardware installation procedure, shows how to
configure the system, and explains how to get started with your
dSPACE system using an appropriate example. It also gives you
information about connecting external devices to the dSPACE system.
Knowledge in handling the host PC and the Microsoft Windows
operating system is presupposed.
Legend
The following symbols are used in this document.
C
Warnings provide indispensable information to avoid severe damage
to your system and/or your work.
N
Notes provide important information that should be kept in mind.
T
Tips show alternative and/or easier work methods.
E
Examples illustrate work methods and basic concepts, or provide
ready-to-use templates.
Summary of Contents for CLP1104
Page 6: ...Contents DS1104 Hardware Installation and Configuration March 2004 I 6 ...
Page 20: ...Safety Precautions DS1104 Hardware Installation and Configuration March 2004 I 20 ...
Page 118: ...Mapping of I O Signals DS1104 Hardware Installation and Configuration March 2004 I 118 ...
Page 162: ...Data Sheets DS1104 Hardware Installation and Configuration March 2004 I 162 ...
