Plug in installation
5
Installing the fixture body
□
□
□
□
□
□
Measure the distance between the two key holes on the crossbar assembly (1).
Mark the location of two key holes on the wall with a pencil (not provided).
Drill a small hole (6 mm) on each mark and push the plastic anchors(DD) into the wall using a hammer.
Attach the two wood screws (AA) in the plastic anchors(DD) as shown.
Adjust shade (2) on the fixture body (A) to your desired location.
Plug the power cord (B) into the outlet, turn on the switch and enjoy.
1
DD
AA
AA
DD
1
2
A
Wall
Switch
1
2