Code Changes
Page 1: ...Code Changes ...
Page 2: ...urity Code default 1234 to enter the additional code programming mode The Program light and Zone 1 light will be on to show that the first code the Master Code is already programmed with the factory default code 1234 The Master Code may be changed but do not try to erase the Master Code The installer can disable user changing of the Master Code by turning on light 2 in section 16 2 15 additional c...
Page 3: ...ne of the digits If the Master Code is forgotten and the panel is left disarmed program a new Master Code using the 8 Installer s Code 25 command If the Master Code is forgotten and the panel is left armed use the 2nd Master Code to disarm the system If the 2nd Master Code is not programmed then the entire programming can be reset to factory default by using the Hardware Reset method described on ...
