DS Automobiles DS 5 Handbook Download Page 37

Page: 37 / 376

Monitoring

If you have to disconnect the battery
following this operation, lock the vehicle
and wait at least five minutes for the
reset to be registered.

Resetting the service indicator

After each service, the service indicator must
be reset to zero.
If you have carried out the service on your
vehicle yourself:

switch off the ignition,

press and hold the trip distance recorder

zero reset button,

switch on the ignition; the distance recorder

display begins a countdown,

when the display indicates

"=0"

, release

the button; the spanner disappears.

Retrieving the service
information

You can access the service information at any
time.

Press the trip distance recorder zero reset

button.

The service information is displayed for a
few seconds, then disappears.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands