manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 34

coolant  
temperature gauge

With the engine running:
-  in zone 

A

, the temperature is correct,

-  in zone 

B

, the temperature is too high; the 

central 

STOP

 warning lamp comes on, 

accompanied by an audible signal and a 
message in the instrument panel screen.

You MUST stop as soon as it is safe to do so.

Wait a few minutes before switching off the 
engine.
Contact a CITROËN dealer or a qualified 
workshop.

After driving for a few minutes, the temperature 
and pressure in the cooling system increase.
To top up the level:

F

  wait for the engine to cool,

F

  unscrew the cap by two turns to allow the 

pressure to drop,

F

  when the pressure has dropped, remove 

the cap,

F

  top up the level to the "MAX" mark.

Be aware of the risk of burns when 
topping up the cooling system. Do not 
fill above the maximum level (indicated 
on the reservoir).

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands