manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 27

25

Monitoring

Service

temporarily, 
accompanied by 
a message.

One or more minor faults for which 
there is no specific warning lamp 
have been detected.

Identify the cause of the fault using the message 
displayed in the screen.
You can deal with some problems yourself, such as a 
door open or the start of saturation of the particle filter 
(as soon as the traffic conditions allow, regenerate 
the filter by driving at a speed of at least 40 mph 
(60 km/h), until the warning lamp goes off).
For any other problems, such as a fault with the tyre 
under inflation detection system, contact a CITROËN 
dealer or a qualified workshop.

fixed, accompanied by 
a message.

One or more major faults for which 
there is no specific warning lamp 
have been detected.

Identify the cause of the fault using the message 
displayed in the screen; you must then contact a 
CITROËN dealer or a qualified workshop.

fixed, associated with the 
flashing and then fixed 
display of the service 
indicator spanner.

The servicing interval has been 
exceeded.

Only on BlueHDi Diesel versions.
Your vehicle must be serviced as soon as possible.

Warning / indicator lamp

State

cause

Action / Observations

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands