manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 257

255

Checks

DS5_en_Chap09_verifications_ed02-2015

When switching on the ignition, the 
UREA warning lamp comes on, accompanied 
by an audible signal and the display of a 
message (e.g.: "Top up emissions additive: 
Starting prevented in 900 miles") indicating 
the remaining range expressed in miles or 
kilometres.
When driving, the message is displayed every 
200 miles (300 km) until the additive tank has 
been topped-up.
Go to a CITROËN dealer or a qualified 
workshop to have the AdBlue

®

 tank topped-up.

You can also top-up the tank yourself.
For more information on topping-up the 
AdBlue

®

 additive, refer to the corresponding 

section.

Remaining range between 350 and 1500 miles (600 and 2 400 km)

When switching on the ignition, the SERVICE 
warning lamp comes on and the UREA warning 
lamp flashes, accompanied by an audible 
signal and the display of a message (e.g. "Top 
up emissions additive: Starting prevented in 
350 miles") indicating the remaining range 
expressed in miles or kilometres.
When driving, the message is displayed every 
30 seconds until the additive tank has been 
topped-up.
Go to a CITROËN dealer or a qualified 
workshop to have the AdBlue

®

 tank topped-up.

You can also top-up the tank yourself.

Otherwise you will not be able to restart your 

engine.

Remaining range between 0 and 350 miles (0 and 600 km)

When switching on the ignition, the SERVICE 
warning lamp comes on and the UREA warning 
lamp flashes, accompanied by an audible 
signal and the display of the message "Top up 
emissions additive: Starting prevented".
The AdBlue

®

 tank is empty: the system required 

by regulations prevents engine starting.

Breakdown related to a lack of AdBlue

® 

 

additive

To be able to start the engine, 
we recommend that you call on 
a CITROËN dealer or a qualified 
workshop for the top-up required.
If you carry out the top-up yourself, it 
is essential to add at least 3.8 litres of 
AdBlue

®

 to the tank.

For more information on topping-up the 
AdBlue

®

 additive, refer to the corresponding 

section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands