DS Automobiles DS 5 Handbook Download Page 218

Page: 218 / 376

DS5_en_Chap08_info-pratiques_ed02-2015

1. Sidelamps

(light emitting diodes - LEds).

2.  direction indicators (PY21W amber).
3.  Reversing lamps (P21W).
4.  Brake lamps (P21W).
5.

Foglamps (P21W).

Rear lamps

direction indicators and brake
lamps (on the wings)

Open the boot then remove the access

cover.

Disconnect the lamp connector.

Remove the two lamp fixing nuts.

Carefully remove the lamp unit from

outside. The retaining clips unclip
automatically.

Turn the bulb holder a quarter of a turn and

change the bulb.

For reassembly, carry out these operations in
reverse order.

Light emitting diodes-LEds

For replacement, contact a CITROËN
dealer or qualified workshop.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands