manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 164

DS5_en_Chap06_securite-enfants_ed02-2015

General points relating to child seats

For maximum safety, please observe the 
following recommendations:
-  in accordance with European regulations, 

all children under the age of 12 or less 
than one and a half metres tall must 
travel in approved child seats suited to 
their weight

, on seats fitted with a seat 

belt or ISOFIX mountings*,

- 

statistically, the safest seats in your 
vehicle for carrying children are the 
rear seats,

- 

a child weighing less than 9 kg must 
travel in the rearward facing position 
both in the front and in the rear.

cITROËN recommends

 that children 

should travel in the 

outer

 

rear seats

 of 

your vehicle:
- 

rearward facing

 up to the age of 3,

- 

forward facing

 over the age of 3.

Although one of CITROËN main criteria when designing your vehicle, the safety of your children 
also depends on you.

*  The regulations on carrying children are 

specific to each country. Refer to the 
legislation in force in your country.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands