manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 153

151

Visibility

DS5_en_Chap05_visibilite_ed02-2015

When the dipped or main beam headlamps 
are on, this function, allows the light beams to 
better follow the road.
The use of this function, coupled with the 
xenon headlamps and the cornering lighting, 
considerably improves the quality of your 
lighting round bends.

Directional lighting

with directional lighting

without directional lighting

Programming

Operating fault

The system is activated or 
deactivated in the vehicle 
configuration menu.
The system is activated by default.
The state of the system stays in 
memory on switching off the ignition.

This function is inactive:
-  when stationary or at low speeds,
-  when reverse is engaged.

If a fault occurs, this warning lamp 
flashes in the instrument panel, 
accompanied by a message in the 
screen.
Contact a CITROËN dealer or a 
qualified workshop.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands