manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 145

143

Visibility

DS5_en_Chap05_visibilite_ed02-2015

Selection ring for main lighting 
mode

Lighting off (ignition off) / Daytime 
running lamps (engine running).
Automatic illumination of headlamps.

Sidelamps only.

Dipped or main beam headlamps.

dipping the headlamps

In the lighting off and sidelamps modes, the 
driver can switch on the main beam headlamps 
temporarily ("headlamp flash") by maintaining a 
pull on the stalk.

displays

Illumination of the corresponding indicator lamp 
in the instrument panel confirms the lighting 
switched on.

Pull the stalk to switch the lighting between 
dipped / main beam headlamps.

Turn the ring to align the desired symbol with 
the marking.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands