DS Automobiles DS 4 Handbook Download Page 82

Page: 82 / 421

Access

Doors

Opening

After unlocking the vehicle or with the

electronic key of the Keyless Entry and
Starting system in the recognition zone,
pull the door handle.

Pull the interior control lever of a front door;

this unlocks the vehicle completely.

Closing

- with the engine running or the

vehicle moving (speed below
6 mph (10 km/h)), this warning
lamp comes on, accompanied
by an alert message for a few
seconds.

- with the vehicle moving (speed above

6 mph (10 km/h)), in addition to the warning
lamp and alert message, there is an
audible signal for a few seconds.

When the selective unlocking is
activated, the first press of the remote
control unlocking button permits
unlocking of the driver's door only.

With the selective unlocking activated:
- opening the driver's door unlocks

the driver's door only (if the vehicle
has not already been completely
unlocked).

- opening the passenger's door

unlocks the rest of the vehicle.

The interior door controls do

not operate when the vehicle is

deadlocked.

From outside

From inside

When a door is not closed correctly:

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands