manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 72

02

70

Access

"Keyless Entry and Starting"

System which permits the unlocking, locking 
and starting of the vehicle while keeping the 
electronic key on your person.

The electronic key can also be used as 
a remote control.
For more information on the 

Remote 

control key

, refer to the corresponding 

section.

The direction indicators flash for a few 
seconds.
Depending on version, the door mirrors 
unfold, the welcome lighting comes on, 
the alarm is deactivated.

Unlocking the vehicle

The vehicle or just the driver's door is unlocked, 
depending on the setting.

F

  With the electronic key on your person and 

in the recognition zone 

A

, pass your hand 

behind the door handle of one of the front 
doors to unlock the vehicle or press the 
tailgate opening control.

Selective unlocking

F

  To unlock only the drivers door, with the 

electronic key on your person, pass your 
hand behind the driver's door handle.

F

  To unlock the complete vehicle, pass your 

hand behind one of the door handle of the 
front passenger door with the electronic 
key close to the passenger door, or 
press the tailgate opening control with 
the electronic key close to the rear of the 
vehicle.

Activation or deactivation of the selective 
unlocking is done in the "

Driving

" menu, then 

"

Vehicle settings

".

By default, complete unlocking is activated.

Complete unlocking

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands