DS Automobiles DS 4 Handbook Download Page 286

Page: 286 / 421

284

In the event of a breakdown

Changing the side spotlamps

(LEDs)

For the replacement of this type of light emitting
diode lamp, contact a CITROËN dealer or a
qualified workshop.

Introduce a flat screwdriver in the hole in

the finisher.

Pull and lever to unclip the bumper finisher.

Remove the two module fixing screws and

remove it from its housing.

Disconnect the bulb holder connector.

Turn the bulb holder a quarter of a turn and

extract it.

Pull the bulb and change it.

To refit, carry out these operations in reverse
order.
To replace these bulbs you may also contact a
CITROËN dealer or a qualified workshop.

Changing foglamp bulbs (on models

with halogen headlamps)

Summary of Contents for DS 4






































































































































































































































































































































































































































Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands

DS Automobiles DS 4, Handbook

Search results

Summary of Contents for DS 4

Reviews:

Brands by name

Popular brands