manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 275

08

273

In the event of a breakdown

The spare wheel is installed in the boot under 
the floor.
Depending on version, the spare wheel may be 
a standard size steel or alloy wheel; for some 
countries of sale it is the "space saver" type.

Access to the spare wheel

If your vehicle has an electric parking 
brake, only a "space saver" type of 
wheel can be stowed in the boot.

F

  Unscrew the central nut.

F

  Remove the fixing assembly (nut and bolt).

F

  Raise the spare wheel towards you from 

the rear.

F

  Take the wheel out of the boot.

Tyre under-inflation detection

The spare wheel is not fitted with a 
sensor. The punctured wheel must be 
repaired by a CITROËN dealer or a 
qualified workshop.

Taking out the standard wheel

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands