manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 262

08

260

In the event of a breakdown

Temporary puncture repair kit

This kit consists of a compressor and a sealant 
cartridge.

It allows the 

temporary repair

 of a tyre.

You are then able to go to the nearest garage.

Access to the kit

This kit is installed in the storage box, under the 
boot floor.

It is designed to repair most punctures 
which could affect the tyre, located on 
the tyre tread or shoulder.
Its compressor can be used to check 
and adjust the pressure of the tyre.

The vehicle's electric system allows the 
connection of a compressor for long enough 

to inflate a tyre after a puncture repair or for 

inflating a small inflatable accessory.

Tyre under-inflation detection

If the vehicle is fitted with tyre under-
inflation detection, the under-inflation 
warning lamp will remain on after the 
wheel has been repaired until the 
system is reinitialised by a CITROËN 
dealer or a qualified workshop.

Only

 the 12 V socket 

at the front

 of 

the vehicle allows the connection of the 

compressor for long enough to repair or 
inflate a tyre.
The other 12 V sockets in the vehicle 
are not suited to the use of the 
compressor.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands