manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 244

07

242

Practical information

Bonnet

Opening

F

  Pull the interior bonnet release lever 

A

, 

located at the bottom of the door aperture.

F

  Push the exterior safety catch 

B

 to the left 

and raise the bonnet.

F

  Unclip the stay 

C

 from its housing on the 

back of the bonnet.

F

  Fix the stay in the notch to hold the bonnet 

open.

The location of the interior bonnet 
release lever prevents opening of 
the bonnet while the front left door is 
closed.

Do not open the bonnet in high winds.
When the engine is hot, handle the 
exterior safety catch and the bonnet 
stay with care (risk of burns).

Before doing anything under the 
bonnet, deactivate the Stop & Start 
system to avoid any risk of injury 
resulting from an automatic change to 
START mode.

Closing

F

  Take the stay out of the support notch.

F

  Clip the stay in its housing on the back of 

the bonnet.

F

  Lower the bonnet and release it at the end 

of its travel.

F

  Pull on the bonnet to check that it is 

secured correctly.

The cooling fan may start after switching 
off the engine: take care with articles and 
clothing that might be caught by the fan 
blades.

Because of the presence of electrical 
equipment under the bonnet, it is 
recommended that exposure to water 
(rain, washing, ...) be limited.

F

  Open the front left door.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands