manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 220

06

218

Driving

Cruise control

1.

  Cruise control mode selection wheel.

2.

  Button for setting the current speed of the 

vehicle as the cruise setting or lowering the 
cruise setting.

3.

  Button for setting the current speed of the 

vehicle as the cruise setting or raising the 
cruise setting.

4.

  Cruise control pause / resume button.

5.

  Display memorised speed settings button.

Steering mounted controls

6.

  Cruise control pause / resume indication.

7.

  Cruise control mode selected indication.

8.

  Cruise speed setting.

9.

  Selecting a memorised cruise speed.

Displays in the instrument panel

System which automatically maintains the cruising speed of the vehicle at a setting programmed by the driver, without any action on the accelerator 
pedal.

The cruise control is 

switched on

 

manually.
It requires a minimum vehicle speed of 
25 mph (40 km/h) as well as:
-  with a manual gearbox, the 

engagement of fourth gear or 
higher,

-  with an automatic gearbox, the 

gear selector at position 

D

 or 

second gear or higher in manual 
mode.

As a safety measure, you are advised 
to keep your feet near the pedals at all 
times.

Switching off the ignition cancels any 
programmed speed setting.

The cruise control system is a driving aid 
that cannot, in any circumstances, replace 
the need to observe speed limits, nor the 
need for vigilance on the part of the driver.

The operation of the cruise control can be 
interrupted (pause):
-  by pressing control 

4

 or by pressing the 

brake or clutch pedal,

-  automatically, if operation of the dynamic 

stability control system is triggered.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands