manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 217

06

215

Driving

System which prevents the vehicle from exceeding the speed programmed by the driver.

Speed limiter

The speed limiter is a driving aid that 
cannot, in any circumstances, replace the 
need to observe speed limits or the need 
for vigilance on the part of the driver.

1.

  Speed limiter mode selection wheel.

2.

  Programmed value decrease button.

3.

  Programmed value increase button.

4.

  Speed limiter on / pause button.

5.

  Display memorised speed settings button.

Steering mounted controls

6.

  Speed limiter on / pause indication.

7. 

Speed limiter mode selection indication.

8.

  Programmed speed value.

9.

  Selection of a memorised speed setting.

Displays in the instrument panel

The speed limiter is 

switched on

 manually.

The minimum programmed speed is 
20 mph (30 km/h).
The programmed speed remains in the 
system memory when the ignition is 
switched off.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands