manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 195

06

193

Driving

Electric parking brake

The electric parking brake has two operating 
modes:

- 

Automatic application / release

 

 

Application is automatic when the engine 
stops, release is automatic on use of the 
accelerator (activated by default),

- 

Manual application / release

 

 

The parking brake can be applied / 
released manually by pulling control 

lever 

A

.

Do not place any object (packet of 
cigarettes, telephone...) between the 
gear lever and the electric parking 
brake control lever.

It is recommended that you do not 
apply the parking brake in very cold 
conditions (ice) and during towing 
(breakdown, caravan...). Deactivate the 
automatic functions and release the 
parking brake manually.

If this warning lamp comes on in 
the instrument panel, the automatic 
mode is deactivated.

Programming the mode

Depending on the country of sale of the vehicle, 
the automatic application when the engine is 
switched off and the automatic release when 
you press the accelerator can be deactivated.

Activation / deactivation is done 
using the vehicle configuration 
menu; refer to the section covering 
the configuration of your vehicle's 
systems.

The parking brake is then applied and released 
manually. When the driver's door is opened, 
there is an audible signal and a message is 
displayed if the parking brake is not applied.

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands