manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 18

01

16

Instruments

Type 2 instrument panel central screen and controls

1.

  Speed limiter or cruise control settings.

2.

  Engine oil level indicator*.

 

Service indicator.

 

Range indicators (miles or km) related to 
the AdBlue additive and the SCR system 
(BlueHDi). 

 

Trip computer.

 

Current audio source playing.

 

Repeat of the navigation instruction.

 

Repeat of the vehicle's speed.

Press the button on the end of the wiper control 
stalk to cycle through the different active 
functions available (trip computer, current audio 
source, navigation...).

Approaching the maximum engine speed, the 
bars flash to indicate to you the need to change 
up a gear.

Rev counter

* Depending on version.

Alert or information messages can also be 
displayed temporarily.

When switching the ignition on or off, 
the speedometer needle and the bars 
of the rev counter and fuel gauge carry 
out a full sweep and then return to 0.

Display zones

Control

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands