manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 165

05

163

Safety

Only the passenger's front airbag can be 
deactivated:

F

  insert the key in the passenger airbag 

deactivation switch,

F

  turn it to the 

"OFF"

 position,

F

  then, remove the key keeping the switch in 

the new position.

According to version, this warning 
lamp comes on in the instrument 
panel and/or in the seat belt and 
passenger's front airbag warning 
lamps display when the ignition is on 
and until the airbag is reactivated.

To assure the safety of your child, 
the passenger's front airbag must be 
deactivated when you install a rearward 
facing child seat on the front passenger 
seat.
Otherwise, the child would risk being 
seriously injured or killed if the airbag 
were deployed.

Reactivation

When you remove the child seat, turn the 

switch to the 

"ON"

 position to reactivate the 

airbag and so assure the safety of your front 
passenger in the event of an impact.

With the ignition on, this warning 
lamp comes on in the seat belt and 
passenger's front airbag warning 
lamps display for approximately 
one minute, if the passenger's front 
airbag is activated.

Operating fault

If this warning lamp comes on in 
the instrument panel, contact a 
CITROËN dealer or a qualified 
workshop to have the system 
checked. The airbags may no longer 
be deployed in the event of a serious 
impact.

Deactivation

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands