manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 163

05

161

Safety

Airbags

General information

System designed to contribute towards 
improving the safety of the occupants (with 
the exception of the rear centre passenger) 
in the event of violent collisions. The airbags 
supplement the action of the seat belts fitted 
with force limiters (all except the centre rear 
passenger belt).
If a collision occurs, the electronic detectors 
record and analyse the front and side impacts 
sustained in the impact detection zones:
-  in the case of a serious impact, the airbags 

are deployed instantly and contribute 
towards better protection of the occupants 
of the vehicle (with the exception of the 
rear centre passenger); immediately after 
the impact, the airbags deflate rapidly so 
that they do not hinder visibility or the exit 

of the occupants,

-  in the case of a minor or rear impact or in 

certain roll-over conditions, the airbags 
may not be deployed; the seat belt 
alone contributes towards ensuring your 
protection in these situations.

The airbags do not operate when the 
ignition is switched off.

This equipment will only deploy once. 
If a second impact occurs (during the 
same or a subsequent accident), the 
airbag will not be deployed again.

A.

  Front impact zone.

B.

  Side impact zone.

Deployment of one or more of the 
airbags is accompanied by a slight 
emission of smoke and a noise, due 

to the activation of the pyrotechnic 

cartridge incorporated in the system.
This smoke is not harmful, but sensitive 
individuals may experience slight 
irritation.
The noise of detonation associated with 
the deployment of one or more airbags 
may result in a slight loss of hearing for 
a short time.

Impact detection zones

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands