manualshive.com logo in svg

DS Automobiles DS 4, Handbook

Share
Download
DS Automobiles DS 4 Handbook Download Page 139

04

137

Lighting and visibility

System for selection and control of the various 
front and rear wiping modes for the elimination 
of rain and cleaning the screens.
The vehicle's front and rear wipers are 
designed to improve the driver's visibility 
according to the climatic conditions.

Wiper control

Without AUTO wiping

With AUTO wiping

Manual controls

The wipers are controlled directly by the driver.

Windscreen wipers

Wiping speed control stalk: raise or lower the 
stalk to the desired position.

Single wipe (press downwards or pull 
the stalk briefly towards you, then 
release).

Automatic wiping (press down, 
then release).
Single wipe (pull the stalk briefly 
towards you).

Fast wipe (heavy rain).

Normal wipe (moderate rain).

Intermittent wipe (proportional to the 
speed of the vehicle).

Park.

or

Summary of Contents for DS 4






































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands