Vibe Machine V-2, Options User’s manual, rev.1.4. 09/2018
DryBell
Doc. No. DM0958/ Page 9
Table 2. Vibe Machine V-2 Setup menu options
VIBE MACHINE V-2 SETUP MENU OPTIONS
SETUP
MENU
1/2
SETUP
MENU
(POSITIONS)
SETUP MODE
FUNCTION
NAME
DESCRIPTION, for what can be
used?
PARAMETER POSITIONS
AROUND THE SPEED
POT
RESET TO
DEFAULT
FACTORY
SETTINGS
MENU
1
1 (E1)
EXPRESSION
PEDAL
POTENTIOMETER
SELECTION
If a linear pot taper is not
standard then the expression
pedal potentiometer taper curve
can be different when various
custom exp. pedals are used. So,
you can change the expression
pedal taper curve depending on
which type of potentiometer is
used in the expression pedal
used with the V-2. If the CV
(control voltage) mode is
selected then the PEDAL+ jack
expects to see control voltage 0-
5V. The expression pedal wiring
diagram is shown in chapter 12.
E1:
LINEAR TAPER
E2,E3:
HOT POTZ II, Mission EP-
100K
S4,S5:
BLACK TOP Deluxe Pro-
Pot, ICAR pot
S6,X7:
HOT POTZ I Type EJ,
Clarostat
T8,T9:
VOLUME PEDAL, LOG
TAPER
T10:
CV (CONTROL VOLTAGE
5V)
LINEAR TAPER
MENU
1
2 (E2)
EXPRESSION
PEDAL
POTENTIOMETER
TAPER CURVE
FINE TUNING
(Also see
If you want to change the speed
contour which you have when
you move expression pedal, you
can fine tune the speed contour.
For the same physical position of
an exp. pedal you will have
different speeds with different
tapers (A, B or C) selected.
E1, E2, E3:
TAPER A (normal)
S4, S5, S6, X7:
TAPER B (faster speeds
prevail)
T8, T9, T10:
TAPER C (slower speeds
prevail)
TAPER A
MENU
1
3 (E3)
EXPRESSION
PEDAL
DIRECTION
REVERSAL
You can use the two directions
of an expression pedal: max
speed on toe down (STANDARD
DIRECTION) or max speed on
heel down (INVERTED
DIRECTION). Also, you can
choose the position where you
want to activate the Cancel
function: heel down or toe
down.
E1, E2:
STANDARD DIRECTION
CANCEL HEEL DOWN
E3, S4, S5:
STANDARD DIRECTION
CANCEL TOE DOWN
S6, X7, T8:
INVERTED DIRECTION
CANCEL TOE DOWN
T9, T10:
INVERTED DIRECTION
CANCEL HEEL DOWN
STANDARD
DIRECTION,
CANCEL HEEL
DOWN
MENU
1
4 (S4)
EXTERNAL
FOOTSWITCH
TYPE SELECTION
The V-2 pedal can work normally
with two types of external
footswitches: momentary and
latching. The footswitch wiring
diagram is shown in chapter 12.
E1, E2, E3, S4, S5:
LATCHING FOOTSWITCH
S6, X7, T8, T9, T10:
MOMENTARY
FOOTSWITCH
LATCHING
FOOTSWITCH
MENU
1
5 (S5)
CANCEL
FUNCTION TYPE
SELECTION
The V-2 has two types of Cancel
mode: original Uni-Vibe Cancel
where the input guitar signal is
colored and slightly boosted, or
Vibe Machine Cancel where the
cancel tone is colored in the
same way but un-boosted.
E1, E2, E3, S4, S5:
VIBE MACHINE CANCEL
(REDUCED VOLUME
BOOST)
S6, X7, T8, T9, T10:
ORIGINAL UNIVIBE
CANCEL (WITH SIGNAL
BOOST)
VIBE MACHINE
CANCEL
