Druck PACE1000, Instruction Manual

Page: 39 / 76

Copyright 2010 Baker Hughes Company.
English–PACE Indicators Instruction Manual | 29
Introduction
4. Maintenance
4.1 Introduction
This section contains procedures for routine maintenance and the replacement of components.
Refer to Section 5, “Testing and Fault Finding,” on page 31.
4.2 Visual Inspection
Inspect for obvious signs of damage and dirt on the following:
a. External of the instrument.
b. Power supply adaptor.
c.
Associated equipment.
Damaged parts must be replaced, contact Druck Service.
4.3 Cleaning
Do not use solvents for cleaning. Clean the front panel with a damp lint-free cloth and mild
detergent.
4.4 Test
Do a standard serviceability test. Refer to Section 5.2, “Standard Serviceability Test,” on
page 31.
4.5 Software Update
To update the PACE1000 internal software, use the following procedure:
1. Insert a USB memory device into a web connected PC.
2. Open Windows Explorer and select the USB memory device root folder. Delete the following
folders if they are present:
i.
DPI
ii. OS
3. Using a web browser go to the following Druck PACE support page:
https://www.bakerhughesds.com/download-center?bh_ref=gemeasurement.com
Table 4 - 1: Maintenance Tasks
Task Period
Visual Inspection Before use
Test Before use
Cleaning Weekly
a
a. May change; depends on usage (e.g. rack mounted,
bench top) and environment (e.g. humidity, dust).
Calibration 12 months
b
b. May change; depends on the required accuracy.