23
15. CONTRAINDICATIONS OF USE
Compliance with the essential safety requirements and machine directive provisions has been checked through the
completion of checklists already drafted and contained in the
technical file
.
Two types of lists were used:
Risk assessment (UNI EN ISO 12100:2010).
Compliance with essential safety requirements (Machine Directive -CE 06/42).
The hazards that have not been entirely eliminated, but that have been deemed acceptable, are listed below:
CAUTION
Low-pressure oil splashes are possible during maintenance (for this purpose,
maintenance activities must be carried out using suitable PPE).
Electrocution: This can occur only in the event of serious negligence by the user who,
however, is qualified.
Inappropriate Posture: The correct overall dimensions and the installation methods
are indicated in this manual.
Use of unsuitable lubricant: the characteristics of the lubricant can be found both on
the unit and on this
User and Maintenance Manual
(in case of doubt, please contact
the Technical Department
DropsA
S.p.A
.
)
