4
CONNECTOR BASES TECHNICAL CHARACTERISTICS
Power supply voltage
VDC
12 - 24
Working temperature
°C [°F]
-20÷ +70 [-13 ÷ +158]
Storage temperature
°C [°F]
-30 ÷ +80 [-22 ÷ +194]
Hardware characteristics
Motor overload restriction
Power transient protection
Protection against power supply disturbances (spikes)
Remote alarm signalling
Cycle control via reed
2 input signals (self-configurable)
PNP - NPN
Self-powered from the same connector
V sensors = Power supply voltage - A = 1A max)
2 Output signals (configurable)
PNP - NPN
V outputs = Power supply voltage - A = 1A max per output
WARNING: Do not power the machine with different voltage than what is indicated on the label.
* NOTE: The indicated flow rate value refers to the following test conditions: grease with NLGI 2 consistency
class, standard environmental conditions (Temperature 20°C [68°F], pressure 1bar [14.5psi]), counter-pressure of 50bar
[735psi] and nominal voltage 12VDC and 24VDC.
5.
COMPONENTS
The main parts, accessories and optional equipment that make up the pump in the various versions are indicated below.
5.1.
OMEGA PUMP WITH FOLLOWER PLATE
Incoming signals connection
(M12 - 4 pins)
Power supply connector
(DIN 43650 - 3+ )
Minimum level with
microswitch
Outgoing signals
connection (M12 - 5 pins)
Identification plate
Maximum level
indicator
Tank 1.2 Litres
Follower plate
Predisposition (M22x1.5)
2
"Progressive"
pumping
units
Predisposition (G1/8")
return in pump
Loading door to greaser
(UNI 7663-A)
Predisposition (M22x1)
8
"Multi-line"
pumping
units
RETURN
CHARGING/LOADING
Touch screen control
panel
