3
The electrical connection provides a DIN 43650 connector for power and two M12 connectors for input and output
signals.
There is an electronic control board that can be used to set different types of lubrication cycles and controls using a
touchscreen display interface.
Its size is greatly reduced, and support distances are interchangeable with several other models (our own and those of
our competitors).
3.
PRODUCT IDENTIFICATION
A label is located on the pump tank that indicates the product code, the
power supply voltages and the basic characteristics.
4.
TECHNICAL SPECIFICATIONS
GENERAL TECHNICAL CHARACTERISTICS
Pumping system
Type
Cam with spring return
Flow rate *
Multi-line
cm
3
/rev
[in
3
/ rev]
0,005 - 0,01 - 0,015 - 0,025 - 0,05
[0.0003 - 0.0006 - 0.0009 - 0.0015 - 0.003]
Progressive
cm
3
/min
[in
3
/min]
2,8 - 5,2
[0.17 - 0.31]
Progressive Reg.
0.4 ~ 2.8 [0.02 ~ 0.17]
Operating pressure
Multi-line
bar
[psi]
200 [2900]
280 [4061]
Progressive
Number of outputs (pumping)
Multi-line
N°
8
2
Progressive
Delivery connection (pumping output)
Multi-line
Type
G1/8"
G1/4"
Progressive
Operating temperature
°C [°F]
-20 ~ +70 [-4 ~ +158]
Storage temperature
°C [°F]
-30 ~ +80 [-22 ~ +194]
Net weight
Kg [lb]
3 [6.6]
Relative humidity
%
90
Tank capacity
Follower plate
l
[gal US]
1,2 [0.32]
0,7 [0.18]
0,4 [0.1]
Cartridge
Lubricant
NLGI
Grease 000 ÷ 2
Protection degree
IP
65
Noise
dB
<70
Power supply voltage
VDC
12 - 24
Maximum absorption
A
4 @12V - 2 @24V
Speed
RPM
17±4
