DOC-0171 Rev G-9
3 2
© 2017 DROPLET MEASUREMENT TECHNOLOGIES
3.
The minimum bend radius of the fiber is 6 cm. Bending the fiber at a smaller radius can
break the glass fiber inside the sheath. If the fiber is broken, the laser will need to be
returned to Droplet Measurement for repair. The following diagram is a 6 cm radius.
4.
When handling the pump laser outside of the box, support the fiber and do not let it hang
down, where it can catch on components and bend to the point of breaking.
Appendix C: Configuring and Testing the SP2’s
Four Analog Input Channels
Configuration
A new feature of the SP2-D is that four analog input channels are available on the instrument’s rear
panel. To set up these channels, follow the steps below.
1.
Click on
Config > Analog In
.
2.
Scroll down the right-hand table to the first undefined line.
3.
Click on the first blank of that line and enter the channel name (e.g., “Back AI 1” in the
screen below.)
