Ignis Operations Manual
Drone Amplified
7.9 DJI Drone Setup
Skip ahead to
if you are using a Pixhawk drone.
Figure 7.9: DJI Drone Setup
Pressing the ”DRONE SETUP” button from the main menu of the Ignis or Ignis GE app
will open a screen where the drone’s settings can be changed, and advanced information
can be viewed. You must be connected to a drone in order to view this. The following is a
description of each setting:
Status:
the overall status of the drone, as you would see if you were flying.
Diagnostics:
DJI errors and warnings produced by the drone.
Camera:
Indicates what model of DJI Camera is connected to the drone. Clicking on this
will take you to settings for the camera.
Remote Controller:
Clicking on this will take you to settings for the remote controller.
Compass Displays information about the compass, and allows you to perform a compass
calibration.
Inertial Measurement Unit (IMU):
Displays information about the Accelerometer(s) and
Gyroscope(s) on the aircraft. IMU calibration is currently under development.
Maximum Flight Altitude:
Allows you to adjust the drone’s maximum allowed flight al-
titude above its takeoff point.
Last Updated
Page 92
Apr 13, 2022
