Ignis Operations Manual
Drone Amplified
3.4 Post Flight Inspection Checklist
1.
Drone Safe:
SAFE
2.
Slipper Block:
EMPTY
3.
Ignis Battery:
DISCONNECTED
4.
Inspect for Visible Damage:
NO DAMAGE
3.5 Preparing for Storage Checklist
1.
Remove Needles from Dropper and Store:
COMPLETE
2.
Separate Dropper from Hopper:
COMPLETE
3.
Clean System:
CLEAN
4.
Empty Reservoir and Pumps:
EMPTY
5.
Flush With Water:
FLUSHED AND EMPTIED
6.
Disconnect Battery:
DISCONNECTED
7.
Remove Battery:
REMOVED
8.
Inspect for Visible Damage:
NO DAMAGE
9.
Store in Case:
STORED
4 Ignis Specific Amplified Normal Procedures
4.1 Normal Procedures
4.1.1 Ignition, Flight Plan and Emergency Procedures
Ignition, Flight Plan and Emergency Procedures:
BRIEFED
Ensure that all personnel that are both directly and indirectly involved in the flight and
ignition operations are briefed on the drone ignition and flight plan. In addition, all
personnel must be briefed on safety procedures and emergency procedures.
The PIC is also responsible for ensuring that all regulatory requirements are met, in-
cluding, but not limited to, filling a flight plan as needed, ensuring that personnel are clear
of the operating area, ensuring no unintended property will be damaged by ignitions, filling
ignition plans as needed, etc
Last Updated
Page 29
Apr 13, 2022
