Ignis Operations Manual
Drone Amplified
7.16 Transect Lines
The Transect Lines feature allows you to generate a sequence of waypoints that will fly
over an area in a series of parallel lines. Touch the zig-zagging arrow icon in the top bar to
open the transects menu, as shown in Figure 7.16a.
Figure 7.16a: Touching the map while in the transect menu will define the corners of the
transect region.
While this menu is open, touch the map at the corners of the region you want to fly
transects over. You can touch the corners in clockwise or counter-clockwise order. You can
drag corners around to move them, and use the Undo button to undo adding a corner. Touch
the Clear button to delete all of the corners.
Inside of the transect region are a series of parallel lines, and an arrow. The parallel
lines indicate where the transect lines will be generated. The arrow points towards the
transect lines that will be flown last.
Last Updated
Page 134
Apr 13, 2022
