Ignis Operations Manual
Drone Amplified
7.12 Flying
Touching the “FLY” button from the main menu will open the screen used to fly the
drone and control Ignis. Figure 7.12 shows an example of this flight screen, and enumerates
important interface elements.
Figure 7.12a: Main interface elements while flying.
This screen puts Android into Immersive mode, and hides the navigation and status
bars. In order to back out of this screen, swipe down from the top to reveal the status and
navigation bars, then press the back button.
The following is a description of the enumerated interface elements shown in
Figure 12a.
1. Overall Drone Status:
This can be one of several states:
DISCONNECTED:
The drone is not connected.
IMU PREHEATING:
The inertial measurement unit is preheating. Please wait for it to
finish.
COMPASS ERROR:
The compass cannot accurately identify the drone’s position.
Last Updated
Page 104
Apr 13, 2022
