Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
4 Amplified Normal Procedures
4.1 Preflight Inspection Checklist
4.1.1 Ignition, Flight Plan, and Emergency Procedures
Ignition, Flight Plan, and Emergency Procedures
:
Briefed
Ensure that all personnel that are both directly and indirectly involved in the flight and
ignition operations are briefed on the drone ignition and flight plan. In addition, all personnel
must be briefed on safety procedures and emergency procedures.
The PIC is also responsible for ensuring that all regulatory requirements are met, in-
cluding, but not limited to, filling a flight plan as needed, ensuring that personnel are clear
of the operating area, ensuring no unintended property will be damaged by ignitions, filling
ignition plans as needed, etc.
4.1.2 Environmental Conditions and Forecast
Environmental Conditions and Forecast
:
Within Limits
Ensure that the weather and the forecasted conditions are within limits for both the Ignis
system and the drone. See 1.9 for detailed specifications.
In addition, storage in hot conditions or leaving the system exposed to direct sunlight
may cause the system to exceed its operational temperature even if the air temperature is
within limits.
4.1.3 Inspect for Visible Damage
Inspect for Visible Damage
:
No Damage
Perform a visual inspection to ensure that there is no damage to the system and that all
cables, connectors, and screws are secure and clean. In particular, check:
•
The magnets on the extended cylinders on the slipper block protrude slightly from the
aluminum cylinders and are clean and undamaged (see Figure 10).
•
The needle assemblies were not damaged in storage or transport.
Do not fly it with any worn or damaged parts.
Last Updated March 12, 2020
Page 28
