drolo
The Stretch Weaver has 2 separate channels that can interact with each
other in various ways, mostly through sidechaining where a channel can
trigger an action that will be applied to the other channel.
When you plug in only one source on the right channel, it will internally
be routed to the left channel, so that you can use most of the modes in
interesting ways even if only one input is being used.
wet/dry:
Controls the level of the wet and dry signals for each channel indivi-
dually. Unity gain is around noon position.
left/right:
Adjusts the threshold at which the respective channel will trigger the
effect applied to the other channel. (except in weave mode, where right
adjusts grain length).
control knob
Its function will depend on the selected mode.
mix L+R ; sep L/R:
in the sep position, each channel is separate.
in mix mode, both of the wet signals are mixed together and routed
equally to both L and R outputs.
bypass switch:
If you give it a short tap (<0.3sec) it acts in latching mode.
If you press it for more than 0.3sec you are in momentary mode.
It’s a buffered bypass.
STRETCH
WEAVER
left
dry
wet
9V
e
xp
wet
dry
ctrl
right
mix L+R
sep L/R
L
R
ringmod
stretch
weave
repeat
tape
pitch
glide
gate
bypass switch
Left channel
DC Power
Supply
TRS
Expression
Input
Right channel
In
In
Out
Out
