Drobo5N2 User Guide
19
1.1.4.3
Using a Router or Switch with the Drobo 5N2
You will be plugging your Drobo 5N2 into a router or switch that must already be configured to work
with your network. Your router or switch must have at least one Ethernet port open and available.
Your router or switch must also support DHCP. If it does not, you will need to directly connect your
Drobo 5N2 to one of your computer’s Ethernet ports for the initial setup.
Tip:
To check for DHCP support, refer to the documentation for your router or switch. You may
also choose to proceed with installation and check for DHCP support only if you experience a
problem
.
For optimal performance, it’s best if your router or switch supports gigabit Ethernet connections
(1000 Mbit/s). Your Drobo 5N2, however, will auto-negotiate the highest connection speed available
to your router or switch.
Related topics:
Checking the Hardware You Need
Summary of Contents for 5N2
Page 1: ...Drobo 5N2 User Guide...
Page 9: ...Drobo5N2 User Guide 9 Figure 2 Back of the Drobo 5N2 Related topic Before You Begin...
Page 53: ...Drobo5N2 User Guide 53 Related topics Renaming Backup Deleting Backup...
Page 134: ...Drobo5N2 User Guide 134 6 In the Username text box modify the user s name as desired...
